news.cnet.com
Congratulations
Tuesday, September 23, 2008
Monday, May 5, 2008
Thursday, May 17, 2007
OSPF over unstable wireless
We enhanced Mikrotik's implementation of Cisco's OSPF protocol with scripts linking signal quality to route cost; therefore insuring that signal fade on the active station would not disrupt internet traffic.
The scripts run every 6 seconds and change route cost according to tx and rx signal levels.
The scripts run every 6 seconds and change route cost according to tx and rx signal levels.
The multipath solution
Big and small challenges.
Although the challenges at the beginning looked impressive, the truth was that everything done so far was the easy part, aligning the antennas was not easy, but did not prove hard.
Later on when this link was to be commercially tested, the real challenge surfaced. How to make it commercially stable?

The biggest problem it turned out is signal fade, immense unpredictable seasonal signal level variations that make the link very unstable especially in hot humid days.
Later on when this link was to be commercially tested, the real challenge surfaced. How to make it commercially stable?

The biggest problem it turned out is signal fade, immense unpredictable seasonal signal level variations that make the link very unstable especially in hot humid days.
The equipment, software, etc...
On both sides of the border we were most comfortable with Mikrotik, 2 routerboard rb532 with Ubiquity Networks SR2 cards were selected. Mikrotik's nstreeme wireless protocol solved the ack timeout problem.

The antenna on the Cypriot side is a 24dB grid centered at 2452 mhz.
Antenna on the Lebanon side, a 29dB grid (above).
The antenna on the Cypriot side is a 24dB grid centered at 2452 mhz.
Antenna on the Lebanon side, a 29dB grid (above).
Subscribe to:
Posts (Atom)